The floor of the SeaPod will consist of the subfloor, the floor beams, and the surface flooring material. Here we are taking a look at the floor beams. These beams will provide the strength and support that we need under the floor.The floor beams need to be rigid because we don’t want the floor to […]
The floor of the SeaPod will be pieced together with custom-cut sections that are unique to each room. The panels are cut from large sheets of flooring and fit together almost like a puzzle. The design of these has taken quite a bit of work but the results have been good so far. The floorplan […]
We are back at the factory with Craig for another update on the subfloor for the SeaPod. The subfloor will consist of 26 sections that will surround the center spar like slices of a pizza. We have one piece sitting on a temporary jig to show what the final alignment will be. Above the subfloor […]
We are back with another update from the Ocean Builders factory for some of the mold that we have been working on. We currently have two molds for the subfloor sections of the SeaPod. We have been refining these molds and now we are using them to produce a few more sections as a test […]
We are back at the factory with Grant and Craig for an update on the production of our floor beams. For the past few weeks, we have been prototyping different methods of making the floor beams for the SeaPod. Through our research and trials, we have settled on the method that we want to use […]
Work has been continuing on the master molds for the body of the SeaPod. We have been applying the fiberglass to every other section of the mold to every other section as we go around. Right now, the white surface of the positive mold and the red tooling gel surface on alternating sections make the […]
As we start to complete the process of making our molds, we can move into making the actual panels of the SeaPod. This video focuses on the molds for the subfloor sections which will support the floors inside the home. You can see two of our subfloor molds which after having some slight deformations, were […]
Here we have some footage from our home marina here in Panama. We needed to move one of our TriPod bases to a different part of the marina so we used that as a chance to take it for a spin and see what it would be like in the open water. In the footage, […]
Here we have our CEO Grant walking us through the design of the walk-in closet that will be located in the master bedroom. One of the biggest challenges in building a floating home like the SeaPod is finding ways to be as efficient as possible with space. When we were reviewing the design of the […]
We are back at the Ocean Builders factory with another update on the progress of our molds. As you can see here, we have just successfully removed another subfloor section from the mold. Our employees are finishing up some polishing on the surface of the tooling gel coat which will be used again to make […]
With many aspects of the SeaPod, we are pushing the envelope and challenging the old ways of doing things that have been done for decades. There has never been anything like the SeaPod ever built before so we are doing our own experimentation and testing of many different things through this process. That being said, […]
Reynaldo Howell Other, Safety Training
Everyone here at Ocean Builders works hard on the SeaPod project, and a lot of that work is potentially hazardous. As a company, we feel the responsibility to give our employees a safe working environment where we can minimize risks and hazards.One of the integral parts of maintaining a safe working environment is Reynaldo Howell, […]
Here you can see some of our employees working together at the marina to insert a ballast tank into one of the side spars of this SeaPod base. These fiberglass tanks have several internal chambers which can be filled with water or air to help balance or adjust the overall buoyancy of the SeaPod.We are […]
Here we have an update on the construction of the subfloor for the SeaPod. The subfloor is made in sections that meet in the middle of the SeaPod like slices of pizza. Each section is made individually and then connected to the center column of the SeaPod. At the top of this structure, we will […]
We have another update from the factory about the SeaPod base that we are currently building. We are beginning to connect the outrigger tubes to the center core. These sections weigh nearly one ton each so we have to use a crane to move them around. As the tube is lifted by the crane, we […]
Access to the roof of the SeaPod goes through the skylight that is located at the top of the shower. We could have easily used a regular ladder for this but we have done so much work to make the SeaPod unique so we felt that a ladder wouldn’t fit the theme of the home. […]
The SeaPod is a smart home that has dozens of automated processes that work together seamlessly. While the whole point of home automation is to make life in a smart home more convenient, it requires an immense amount of work to achieve that integration and operation that we need.When we originally started on this journey, […]
Before we can make our molds, we have to build the plug, which is what we call the positive mold. The plug is essentially the shape that we want the final product to be. So after the plug is built it is used to create the negative molds. The negative molds are what we use […]
When you look at the SeaPod, one of the striking features that you’ll notice is the huge panoramic windows that seem to wrap around the home. While these windows look stunning and provide wonderful views from the inside, they were quite a challenge to engineer.The original plan was to have one large window that would […]
Reserve your home by joining our waiting list!
Want to find out the latest updates?
Submit your e-mail and we will keep in touch.
GENERAL
BEDROOM
BATHROOM
KITCHEN
LIVING ROOM
ENGINEERING ROOM
ROOF
SPAR/DOCK AREA
PATIO
3 half floors
2 residents | 2 overnight guests
35 ft long | 26.9 ft wide | 23 ft tall
833 ft² / 73 m² living space
7.5 ft above the waves
Up to 578.45 ft² total windows
1250 ft³ storage space
Spar & Foundation: Steel, concrete
1,400 liters water storage
Exterior: Fiberglass, gel coat, foam
We have designed the bedroom to be your window to the world with unparalleled panoramic views that may inspire you to stay in bed all day long.
231 ft² Living Space
51.7 ft² Total Window Size
The Living Room is a large space that you can fully customize to your liking. It can be a space for entertaining guests, a second bedroom, a gym, an office, or whatever your imagination desires.
178.6 ft² Living Space
167.9 ft² Total Window Size
Want to find out the latest updates?
Submit your e-mail and we will keep in touch.
Start your search by typing your technical expertise or areas of interest (eg. Engineering, Marine Restoration, Coral, Software, Waste, etc).
We believe that we are in the early pioneering days of a revolutionary new way of living and that entirely new industries will be born as civilization starts expanding into the sea.
Find a project you are passionate about and get started in helping to change the world in real and achievable ways.
We are looking for passionate entrepreneurs, aquapreneurs, technology enthusiasts, electronics hackers, marine biologists and other people that are passionate about developing new products and services that civilization will need to live on the ocean. You can participate remotely or be part of our Blue Economy Incubator Residential Program where you will be surrounded with like minded people.
Want to find out the latest updates?
Submit your e-mail and we will keep in touch.
Camera Gear & More Frequent Factory Updates
Grant Romundt Lifestyle
We truly think that the work that we are doing here at Ocean Builders will change the way the world looks at housing forever. With this idea being so unique, we felt that it was very important to document the process and keep everyone updated during every step. To help with the media side of […]