We are getting down to the nitty-gritty on the floating spar. The painting continues! We have all of the protective paint and white paint applied and now the crew is finishing up the blue paint on the outriggers. We started with protective paint to prevent corrosion on the surface, but it doesn’t look great so […]
Paint, paint, paint!!! We have had lots of painting going on at the factory during these last few days. We have completed most of the exterior finishing work on the EcoPod and begun to paint the outside. We are using paint guns to spray on even layers of paint to the entire exterior of the […]
Grant has another factory update – the mold for the Wazebo seating area is almost ready to go! We built the plug and then used that to make this mold. Once this mold is ready, we can take it off of the plug and do the finishing work needed to get it finished. We can […]
Our big global launch event is coming up very soon and we are working hard to get everything ready. One of the recent accomplishments by our team was to get the spiral staircase inside of the center spar installed and painted. This spiral staircase will serve as the main entry point into the Pods. The […]
Grant is back at the factory with an update on the SeaPod prototype. The final floor section is going in! This last piece is part of the bedroom floor on the top level. Just like installing floors in a traditional home, the final piece is usually the hardest to get in and this was no […]
We brought in the big guns to build the cabinets for our homes! These four guys arrived at the factory a few days ago and have been working like lightning so far. We felt that it was a good idea to bring in cabinet specialists who are masters of cabinetry so that we could have […]
The EcoPod bathroom is coming along nicely and Grant is back at the factory to give us a quick update on the progress. We have put lots of thought into the design of every aspect of the home, including the bathroom and we think that the experience will be like no other.The bathroom sink area […]
The time has come to get the spars on the TriPod base painted! As you can see in the video below, the steel looks rusty. This is just surface rust that is totally normal and doesn’t affect the structural integrity of the steel. It is unavoidable in the humid climate we are working in here […]
Another day, another set of challenges to overcome, and another successful job done by the Ocean Builders crew. We got the hot tub lounge and the hot tub installed on the outer spar.This proved to be difficult for a few reasons. The first is that we are working several meters above the ground. So everything […]
Grant and Richard did a bit of testing to show the benefits of the special concrete mix that we are using for the docks compared to a normal concrete mix. Our mix has four additives that have different benefits. It has fibers to hold everything together, a superplasticizer to add strength and reduce the water […]
We have our 3D printer up and running and we are starting to produce coral habitats! This 3D printing project has been in the hands of Arianna and she has been doing a fantastic job. Using a 3D printer like this is a new experience for all of us but we are adapting well so […]
Now that we have installed the solar station platform on the outer spar, we are moving on to building the frame that will hold the solar panels. Everything is mounted on the outer spar so it will be out of the way and have full sunlight for most of the day.Solar power is a great […]
Grant is back at the factory with Craig who is working on the first rope bridge that we are making for the EcoPod. This bridge will go from the center dock on the floating tripod base to the solar array on the outer spar. The bridge itself is about 21’ long and uses stainless steel […]
We are finally starting to install the first windows into the EcoPod! This project has been more than a year in the making and we are very excited to reach this massive milestone. We finished up the ceilings and now it’s time to move on to the windows. The EcoPod is still on land so […]
A normal home on land is generally securely built into the ground and won’t move, but that is not the case with a floating home on the water. Keeping the SeaPod stable is important for both comfort and safety so we have decided to use IMU sensors to help monitor the tilt, angular rate, and […]
While the main intention for the SeaPod is to be a sustainable and eco-friendly floating home, there are other use cases for them. One of those options is to use a SeaPod as a floating cafe, restaurant, or bar. You could also have these same concepts on land in the GreenPod configuration.The main area will […]
We have spent more than a year coming up with the design for the Wazebo(water+gazebo) and after plenty of edits and revisions, we have come to a final design that is going to be the perfect outdoor hangout spot.Having a great outdoor living space is so important when living in a tropical area with beautiful […]
Now that we have the new hot tub area completed, it is time to do a test fit to see if we need to make any more adjustments for everything to fit. This circular piece that you see will be like a cushioned bench seat where you can relax and hang your feet over the […]
We recently got a new piece of machinery here at the factory to help us clean the steel and get it ready to work with. This new Laser Steel Cleaning Machine is going to increase the speed of production and make life a whole lot easier for our steel department!Our factory is located in Panama […]
Grant has always been a visionary. From a young age he caught onto new technology trends long before they became commonplace.
This fascination with technology began at a young age where he would build electronic circuits from scratch, disassembling and re-assembling household electronics and then at the age of 8 in 1980 he became the first and youngest student in Canada to compete in a science fair with a software program on an early home computer. His passion continued to propel him forward, leading him to be featured in the Globe and Mail newspaper as having the most advanced mobile paperless office in Canada in 1995 complete with being the first retail adopter of VoIP technology in the country.
Fueled by this entrepreneurial spirit, Grant found himself living in a San Francisco tech frat-house alongside one of PayPal’s co-founders. This connection sparked the creation of his own software development company, which boasted a prestigious clientele including billion-dollar giants like Wella Professionals, L’Oreal Professional, and a roster of other beauty industry brand leaders.
By 2016, Grant had outsourced his software company so we was effectively retired upon which he moved into a floating home in Toronto. After living there for 3 1/2 years he conceived a revolutionary idea: an eco-restorative floating smart home unlike anything the world had ever seen. His vision materialized on September 22nd, 2022, with the unveiling of the first model open to the public.
He is currently dedicated to pioneering the technology that will form the foundation of the world’s first floating city – a project that demands not only innovation, but the seamless integration, development, and iteration of groundbreaking technological solutions. Grant’s story is one of relentless pursuit, a testament to the power of imagination and the drive to transform futuristic concepts into tangible realities.
Omer is a dedicated entrepreneur, engineer, and designer with over 11 years of experience in Mechatronics and IT projects. He has been instrumental in designing and implementing the advanced technology that powers OceanBuilders homes. This includes the development of the comprehensive home automation system, electrical and power generation systems, water treatment solutions, lighting, showers and sinks, entertainment systems, security measures, air conditioning system, and all the home sensors such as the weather station and gesture control. Omer also designed the drones for delivering goods to the SeaPod and all the marine-grade electronics from scratch, including circuit board design and the manufacturing of all these electronics for each home.
In addition to his work with OceanBuilders, Omer is the founder of Shark Eye. Shark Eye specializes in video analysis for security and business statistics, as well as developing cutting-edge vehicular access systems that use cameras and AI to detect vehicle license plates, colors, and makes. These systems provide a more secure access solution compared to traditional tag-based systems.
Omer is also experienced in training large language models (LLMs) and neural networks for object detection, and he has worked extensively with thermal cameras. As a Mechatronics Engineer, his passion for innovation and optimization drives his continuous pursuit of creating groundbreaking products and solutions.
Reserve your home by joining our waiting list!
Want to find out the latest updates?
Submit your e-mail and we will keep in touch.
GENERAL
BEDROOM
BATHROOM
KITCHEN
LIVING ROOM
ENGINEERING ROOM
ROOF
SPAR/DOCK AREA
PATIO
3 half floors
2 residents | 2 overnight guests
35 ft long | 26.9 ft wide | 23 ft tall
833 ft² / 73 m² living space
7.5 ft above the waves
Up to 578.45 ft² total windows
1250 ft³ storage space
Spar & Foundation: Steel, concrete
1,400 liters water storage
Exterior: Fiberglass, gel coat, foam
We have designed the bedroom to be your window to the world with unparalleled panoramic views that may inspire you to stay in bed all day long.
231 ft² Living Space
51.7 ft² Total Window Size
The Living Room is a large space that you can fully customize to your liking. It can be a space for entertaining guests, a second bedroom, a gym, an office, or whatever your imagination desires.
178.6 ft² Living Space
167.9 ft² Total Window Size
Want to find out the latest updates?
Submit your e-mail and we will keep in touch.
Start your search by typing your technical expertise or areas of interest (eg. Engineering, Marine Restoration, Coral, Software, Waste, etc).
We believe that we are in the early pioneering days of a revolutionary new way of living and that entirely new industries will be born as civilization starts expanding into the sea.
Find a project you are passionate about and get started in helping to change the world in real and achievable ways.
We are looking for passionate entrepreneurs, aquapreneurs, technology enthusiasts, electronics hackers, marine biologists and other people that are passionate about developing new products and services that civilization will need to live on the ocean. You can participate remotely or be part of our Blue Economy Incubator Residential Program where you will be surrounded with like minded people.
Want to find out the latest updates?
Submit your e-mail and we will keep in touch.
Preparing for Launch: Emergency Floatation
Grant Romundt Construction
Safety is always #1 for the Ocean Builders crew and when it comes to big projects like mounting the EcoPod onto the floating TriPod, the more safety the better.This is not the most simple thing that we will do. The lift that we use to raise the EcoPod up and over the TriPod can only […]