The EcoPod bathroom is coming along nicely and Grant is back at the factory to give us a quick update on the progress. We have put lots of thought into the design of every aspect of the home, including the bathroom and we think that the experience will be like no other.The bathroom sink area […]

Grant is back at the factory with Craig who is working on the first rope bridge that we are making for the EcoPod. This bridge will go from the center dock on the floating tripod base to the solar array on the outer spar. The bridge itself is about 21’ long and uses stainless steel […]

We are finally starting to install the first windows into the EcoPod! This project has been more than a year in the making and we are very excited to reach this massive milestone. We finished up the ceilings and now it’s time to move on to the windows. The EcoPod is still on land so […]

Grant is back with a big update from the factory about the EcoPod. The ceilings are almost finished! Most of the ceilings are done and we just have a few small areas to wrap up. The crew has been working hard to get everything put together and we are making great progress! Having the ceiling […]

Grant is here to give us a little update about the shower in the EcoPod. You can see in the video below that Grant is standing in the shower, or at least the area that will become the shower. We have the main walls up now so we can see the layout of how things […]

Grant is back with a quick update on the ceiling installation in the EcoPod. We now have four ceiling panels securely installed in the bedroom. This is somewhat of a slow and steady kind of process so it will take a week or so to get all of the panels installed.You can see in the […]

BIG NEWS!!! The first shipment of EcoPod windows and frames has arrived at the factory! This is a huge day for us as these windows have taken quite a lot of time and were a massive headache, but we have finally reached the light at the end of the tunnel.The truck arrived at the factory […]

The first ceiling panel has been installed in the EcoPod! We completed the ceiling support grid and have now moved on to getting the panels installed. This ceiling ended up being almost exactly three meters tall and we are very happy with how roomy and open everything feels. It will take us about a week […]

Now that the roof is in place, it is time to get working on the ceiling and everything that will go in between the roof and the ceiling. One crucial piece is the supports that will help hold the ceiling panels in place.We are making the supports in a grid pattern similar to what would […]

This outer ring for the EcoPod roof is made up of 28 smaller sections which are then put together into four pieces made up of seven sections each. These smaller sections are much easier to manufacture than a larger section so this process worked out pretty well. We assembled all of the pieces on the […]

Part 2 of our process to get the EcoPod roof put together went fairly smoothly with only a few expected difficulties. Installing these roof sections was not easy and they take quite a bit of work to get properly fitted together, but we got the job done at the end of the day. Placing this […]

This video shows the process of how we install the four quarter sections of the EcoPod roof. We made these four sections with a mold and finally started to put them into place. These pieces are large and cumbersome to deal with but with a bit of muscle and help from our telehandler, we were […]

As we move closer to getting the EcoPod prototype finished up, Grant wanted to share a bit of the process of installing the outer ring of the roof. This roof is made of 28 sections which are installed together to make a big donut shape. Once the outer ring is in place we will install […]

Most parts of our homes are built by using molds built from 3D printed designs to shape fiberglass panels that we will then fit together. Some pieces, however, use a different method. One example of that is the bathroom sink area of the EcoPod.The video below shows the process of how we are making the […]

The EcoPod roof has multiple uses and features. The most obvious is that it is a roof, it protects the people inside from the sun and rain, just like any normal roof. This roof will also have a slight cone-shape that will act as a funnel to collect rainwater to be used within the home.Those […]

We have been working on the EcoPod roof for the past few weeks and we are now finishing up production on the final section of the inner disk. The video below shows the process that the crew has to do to release each section from the mold. These 1.3cm fiberglass sections have an extremely tight […]

The frame of the EcoPod is really coming along now. We have the top portions of the walls installed and now we can really see where the windows will be. This top wall section will be where the roof eventually will be mounted. The installation of the bottom section of the walls was successful so […]

Connor is coming to us from the factory with an update on the assembly of the first EcoPod roof. We previously had an update from Grant about the progress of the outer ring and now we are making progress on the center portion which will have more utility than just a normal roof.To start, we […]

The EcoPod walls are really coming together as we get them mounted in place on our first prototype. We have spent quite a bit of time getting our wall section molds ready and now we are ready to throw things into production. So far, the walls are coming along nicely and things are looking great.The […]

We are at the factory with an update on the EcoPod roof from Grant! We spent the day assembling the 28 roof sections to make this big donut which will be the outer edge of the EcoPod roof.We went with this design because we wanted to have a rain collection system that can catch the […]